Open Now

Certified Transmission

"The Job Done Right"

Omaha Transmission Repair

Certified Transmission was founded and is located in Omaha Nebraska. Since opening in 1979 by Peter Fink, Certified Transmission has become a major supplier of remanufactured transmissions throughout the United States. With 14 retail locations and independent dealers & installers across America, our products and services set the standard in the transmission service & repair industry.

Satisfied Customers

Share Review

Meet Our Team

Picture of Peter Fink
Peter started Certified Transmission back in 1979 at the young age of 19. He had his tools, $1000, a two-bay gas station, and strong determination. Peter always had a vision for Certified Transmission to be larger than just your normal repair shop. He set out opening more locations and eventually added a centralized rebuilding facility. Over the last 30+ years Peter has grown his company to be the largest remanufacturer in the Midwest and now employs over 400 team members. Peter and his wife, Carolyn (since 1986) have three children: Amanda, Peter Jr., and Alex. Peter enjoys spending time with his family, snowmobiling, going to concerts, and attending sporting events.
Picture of Amanda Fink
Amanda started working with Certified Transmission in 2007 as wholesale account representative. After a couple years she became a service adviser and floating manager, and now she is the Area Manager for all the Omaha, Lincoln and Council Bluffs retail transmission shops. She helps maintain the integrity and quality of work that our retail locations provide to our many customers. Working closely with customers is something that she greatly enjoys. Amanda has her Bachelor's degree in Business. Amanda has two children, James who is 4 and Josie who is 3. She enjoys yoga, reading, and cooking in her free time.
Picture of Larry (LJ) Porter
LJ has worked for Certified Transmission for over 20 years and is an ASE certified technician in transmissions, transaxles, manual transmission, steering, suspension and brakes. He was a remove and replace (R&R) technician for 6 years and has been a diagnostician since 1996. He has attended two ATRA national transmission expos and have also attended 25 ATRA and ATSG transmission seminars. He enjoys old cars, air boating, and riding motorcycles.
Picture of Bill Dunbar
Bill started at Certified Transmission in 1989 as a transmission rebuilder. After rebuilding transmissions for a few years he wanted to do something different so he started working in the retail stores, first as a shop foreman, then as a diagnostician and then a store manager. Bill was the manager of the retail store in Millard before moving to the Omaha remanufacturing plant as the plant manager in 1993. In 1993, the Omaha plant was a lot smaller than it is now and Bill's main duties revolved around the production of the units. As things have grown, Bill's daily duties revolved around the entire plant operation and the processes and protocols of each department. Since production is in his blood, that is where most of his attention was focused prior to becoming the Parts Manager for Certified Transmission. Bill is involved with APICS (The Association of Operations Management) and has earned their CPIM & CSCP certifications.
Picture of Jeff Stuck
Jeff entered the workforce right out of high school and tested the waters in construction and general auto repair before joining Certified Transmission in 1990. He started at Certified as a machine operator/welder. At this time the torque converter department was in its infancy but with growth comes opportunity. As the converter department grew, Jeff took on additional responsibility, being named manager in 1997. Jeff has also served on the Torque Converter Rebuilders Associations Board of Directors since 2007 and previously served as President of the Association.
Picture of Ryan Thompson
  • Ryan Thompson
  • Department Manager
Picture of Mike Prendergast
  • Mike Prendergast
  • Sales Trainer
Picture of Jess Garrison
  • Jess Garrison
  • National Sales Manager
Picture of Duane Parks
Duane started working for Certified Transmission in 2000 as a dyno machine operator. In 2002 Certified purchased its first electronic automated dyno and Duane volunteered to be the operator. He created nearly all of their dyno tests from that point on. In October of 2004, he became the dyno department manager. The dyno machines test the transmissions before they are shipped from the plant. Every single transmission that is remanufactured goes through the dyno department. His main focus is to ensure the quality of the units Certified produces
Picture of Doug Nebel
Doug started with Certified in Dec 2016. He as a degree in Mechanical Engineering from the University of Nebraska Lincoln and over 25+ years' experience in manufacturing processes and operations. Doug has worked in a variety of manufacturing environments from electronics, where he built Medical equipment, components for Dept. of Defense contractors, and even turn signals for Harley's . He also worked in the Ag industry making grain handling equipment like augers, unloads and dryers. Doug has also sat on the Industry Advisory Committee for Metropolitan Community College's welding department and has his Lean Manufacturing Certification from the Nebraska Business Development Center at University of Nebraska Omaha.
Picture of Jim Audet
Jim Audet has spent 30 of his 36 year career in the auto industry with Certified Transmission.
Picture of Rick VanRoy
Rick joined the Certified Transmission team in March, 2008. His accomplishments include an Associate Degree in Automotive Technology as a graduate of Southeast Community College in Milford, NE, as well as earning the Ford Senior Master and ASE (Automotive Service Excellence) Master Technician certifications, which he keeps current. As our Client Services Manager, Rick now oversees the wholesale sales, inventory and warranty operations, and our shipping department.
Picture of Holly Sullivan
Holly came to Certified Transmission in 2013 after spending 7 years in the motorcycle industry. She has a BSCM (Basics of Supply Chain Management) Certificate. Holly is also a competitive powerlifter in USPA and APF.
Picture of Jody Carnahan
Jody began his automotive career selling auto parts at a local parts store at the age of fifteen. He rebuilt his first transmission when he was sixteen. Joining Certified Transmission in 1986, and helped develop our first dyno department. He has held various technical positions throughout his career, including diagnostician and builder duties, as well as several retail store management positions. Jody's current role is working as a technical consultant for our warranty department, holding certifications from both ASE and ATRA. Outside of work, Jody enjoys life with his wife of 30+ years, Sarah, and is the father of two boys. His hobbies include rebuilding street rods, riding Harleys, hunting, and bowling.
Picture of Chris Adams
Chris Adams started with Certified in 1986 as an R&R technician (remove and replace). He has an Associate Degree in Automotive Technology from SCC in Milford, NE. He also holds the ASE master tech with the L1 certification. Throughout his career at Certified, Chris has held numerous positions including: Diagnostician, Rebuilder, Retail Store Manager. Currently he is diagnostic trainer and is responsible for keeping our diagnostic techs at the retail locations at the top of their field, and keeping current with all the latest trends and tools in our industry. Chris also works closely with the technical dept at the remanufacturing plant and helps coordinate our fleet of research and development vehicles for testing. He is married to his wonderful wife, Linda, and they have one daughter, Sabrina.
Picture of Randy Petersen
  • Randy Petersen
  • Lead Diagnostician
Picture of Joe Mitchell
Joe came to Certified Transmission with an extensive back ground in sales. Joe had also owned his own automotive repair shop. Joe has been with Certified Transmission for over ten years and has been instrumental in all areas from customer service to sales training for the company. Joe and his wife Deb have seven children and fifteen grandchildren. The enjoy spending time with family, riding their Harley, watching movies and reading.
Picture of Mike Prendergast
  • Mike Prendergast
  • Sales Trainer
Picture of Ed Forenberry
Ed joined Certified Transmission in May 2007 as Assistant Manager of the dyno department where he remained until June 2010, when he won an opening on the sales staff as Stock Order/Core Return manager. In the time since, Certified Transmission has experienced explosive growth and Ed's primary focus has been continuous improvement in moving product to our customer, and managing account credits. Ed holds both an Associate in Applied Science (Aerospace), and a BA in Business. Of the two, he views the experience of complying with rigid quality management standards required by the aerospace industry most valuable when it comes to managing wholesale transmission distribution across numerous stocking locations.
Picture of PJ Fink
PJ Fink has officially been working at Certified Transmission for the past four years but has been part of the auto industry his whole life. He is ASE certified. His favorite car is a 1964 Daytona Coupe, but likes pretty much anything made by Chevy or Dodge.
Picture of Molly Woodworth
  • Molly Woodworth
  • Customer Service
Picture of Rich Baker
Rich began his career at Certified Transmission in 1999 after many years in the automotive industry. He soon joined the wholesale division as a Customer Service Representative and experienced the department's extensive growth. Rich works with some of Certified Transmission's larger distributors. He has developed methods to help clients correctly identify the specific transmission needed for an application, even when vehicle accessibility is not readily available. Rich's hobbies include reading history books and watching hockey and football games.
Picture of David Shadlow
I have worked at Certified Transmission since 1990. I have two great children and I enjoy playing cards and spending time with my family. My hobbies are wood working, working on cars and surfing the internet.
Picture of Brian Salisbury
Brian has been providing quality customer service in the auto industry for 25 years and with Certified Transmission for almost three years. His hobbies include golfing, auto shows and auctions. His favorite type of car is a Corvette and he enjoys travelling to places like Las Vegas, Hawaii and California.
Picture of Scott Shaeffer
I have been in the service end of the automotive industry since 1978 working in new car dealerships and have been at Certified Transmission since 1998 in the wholesale division as a outside sales representative. I am responsible for the entire states of Nebraska, Iowa, South Dakota and parts of Kansas and Missouri. As far as hobbies I collect palm trees and have well over 100.
Picture of Rodney Schmidt
  • Rodney Schmidt
  • Sales
Picture of Matt Brunker
I got my start in the automotive industry back in 1998. I have worked in multiple capacities since then from turning wrench’s to regional management in aftermarket parts. I am currently responsible for sales in the Colorado and Southern Wyoming markets. My hobby is racing, here in Colorado I race in the NASCAR Whelen All American Series.
Picture of Tom Hall
I have been the webmaster for Peter Fink, the owner of Certified Transmission, for several years. In fact, a great amount of my professional success in doing websites for transmission and general repair shops is attributed to my relationship with Peter and Certified Transmission. In addition to doing the website for Certified Transmission, I also maintain websites for several Certified Transmission distributors to include Waterloo Transmissions, Freeway Transmissions, Express Transmissions, and Western Transmission.

Map & Directions

Click for Directions

Door to Door